If you love participating in outdoor activities, Kanarraville, UT, is a wonderful place to live. It’s home to Kanarra Falls, one of Utah’s most majestic hiking adventures. It features a nearly four-mile hike through a slot canyon with multiple waterfalls and tons of other breathtaking sights.

However, local homeowners will want to retreat indoors at certain times of the year when the temperatures climb dramatically. They hover between the 80s and 90s throughout June, July, and August.

Understanding how to know if your AC compressor is bad is crucial for homeowners, as an issue like this can make it impossible to keep their homes cool. These signs indicate something is wrong with your cooling system’s compressor and suggest you need to schedule AC repair in Kanarraville, UT.

Your AC System Is Not Blowing Cold Air

Is your AC system blowing warm air and failing to keep your Kanarraville, UT home cool? Warm airflow from your vents could indicate numerous issues with your home’s cooling system.

Something as simple as a dirty air filter can prevent a residential air conditioning system from functioning correctly. Your AC system might also have one of the following problems:

• Refrigerant leaks
• Thermostat issues
• Dirty or frozen evaporator coils

In an almost worst-case scenario, you may also have a faulty compressor, causing your AC system to struggle to keep you cool in the heat. Call an AC repair company right away to determine which of the common air conditioner problems is causing complications.

It Is Experiencing Weak Airflow

Is the air your AC system distributes throughout your house in Kanarraville, UT, trickling through your vents? If so, it won’t make a significant difference in your home’s interior temperature.

Once again, this weak airflow can be caused by several different factors. For example, your AC fan might be broken, preventing it from blowing enough cool air to the various parts of your house. You may also have a faulty AC compressor affecting your system and causing reduced cooling efficiency.

It Appears To Be Leaking

If you’re wondering how to know if your AC compressor is bad, sneaking a quick peek at it could provide the answer you’re looking for without too much effort on your part. Inspect the portion of your AC system outside your home and check if it is leaking.

If it is, this likely indicates a refrigerant leak in the area of your compressor, suggesting that it is actively failing. Turn your AC system off immediately and rely on HVAC experts from a trusted company, such as Iron Mountain Plumbing, to find a suitable solution.

It Makes Loud Noises

Often, you won’t have to look too hard to figure out how to know if your AC compressor is bad in Kanarraville, UT. Your AC system may “tell” you that your compressor is failing.

When you turn your cooling system on, listen out for any loud noises it might make, such as:

• Grinding
• Rattling
• Squealing

They might help reveal compressor clutch issues that will only worsen if you fail to take action by fixing them or replacing your compressor.

It Struggles To Start or Even Refuses To Start at All

The compressor in your home’s AC system is such an essential component that, if it isn’t working as it should, your entire AC system may not start. Hard starting is a clear indication that something may be wrong with your compressor.

Rather than continuing to try to start it, leave it turned off for the time being until a professional HVAC technician assesses the situation.

It Causes Electrical Issues in Kanarraville, UT

Not starting is one of the many electrical issues an AC system may experience when its compressor fails. When you attempt to start it, the circuit breakers can also trip.

Electrical issues, like tripped circuit breakers, are among the most complex problems your AC system may encounter. Arrange for a reputable HVAC company to inspect your system and determine if your AC compressor is bad.

Do You Suspect Your AC Compressor Is Bad in Kanarraville, UT? Reach Out to Us

Figuring out how to know if your AC compressor is bad is not always easy. Many of the symptoms of a failing compressor are also symptoms of other AC-related issues in Kanarraville, UT.

Instead of assuming your compressor has stopped working, allow Iron Mountain Plumbing to inspect it. We will thoroughly analyze every aspect of your AC system to determine the necessary steps to repair it.

Contact us today to set up an appointment.

Established in the early 1850s, Parowan, UT, is known as the “Mother Town of Southern Utah” because it was the first city settled in the area. It is home to many sites, including the Old Rock Church Museum and Parowan Gap Petroglyphs, that make it a big part of the Beehive State’s rich history.

Parowan is also known for having some of the chilliest temperatures in Southern Utah, frequently falling into the teens from November through March.

If you have a furnace blowing cold air during this period, it will leave your home’s interior unbearably uncomfortable. You will have no choice but to get to the bottom of the issue and repair it as soon as possible with the help of Iron Mountain Plumbing, an expert team offering reliable heating services in Parowan, UT. 

So, why is your furnace blowing nothing but cold air? Here are several potential complications that can lead to this happening.

Clogged Air Filter

A furnace filter removes dirt, dust, pet dander, allergens, and other contaminants from the air that passes through the heating system in your Parowan, UT, home. However, it will struggle to do its job if you fail to replace it every few months.

A clogged air filter can also force a furnace to work harder than usual to heat a home. In some instances, the strain it puts on a home’s heating system will result in an overheated furnace.

If this ever occurs in your home, you will likely get left with a furnace blowing cold air. Avoid this by replacing your furnace’s air filter at least once every three months and sometimes more often if you have an unusually dusty house. It will reduce the chances of you encountering furnace-related problems.

Incorrect Thermostat Settings

If you have a furnace blowing cold air, your first instinct will typically be to blame the furnace itself. You might be tempted to look into how a furnace works to pinpoint the problem.

However, your furnace might not be the issue. Instead, you may have a faulty thermostat on your hands, or you might have been trying to run your furnace with the wrong thermostat settings. In certain situations, replacing the batteries in your thermostat can also provide a quick fix.

Gas Supply Problems

According to the U.S. Energy Information Administration, nearly half of American households use natural gas to heat their homes. If your house has a gas-powered furnace, gas supply problems may cause your furnace to blow cold air.

Your furnace might not receive enough natural gas if it has a malfunctioning gas valve. An obstructed gas line could also be the cause of your furnace issues.

Whatever the case, repairing gas supply problems is not a job for the DIY enthusiast. You will need a professional HVAC technician from a trusted company, such as Iron Mountain Plumbing, to tackle this project.

Pilot Light Issues

Pilot light issues, such as a faulty pilot light that won’t stay lit or a dirty flame sensor, are two other common causes of a furnace that is blowing cold air in Parowan, UT. Replacing a pilot light or flame sensor may be the only solution to this problem.

Once again, it is recommended that you seek the assistance of experienced heating and cooling experts to resolve issues like these. It’s the only surefire way to get your furnace running smoothly again.

What To Do When Your Parowan, UT, Furnace Is Blowing Cold Air

Living in a Parowan, UT, home that has a furnace blowing cold air is not an option, especially in the dead of winter. If you ever sense that something seems off with your heating system, take the following steps:

1. Check your thermostat to make sure it is set to the correct temperature.
2. Inspect your air filter to find out if it needs to be replaced.
3. Look at your pilot light to see if it is turned on.

From there, reach out to Iron Mountain Plumbing for assistance. We can diagnose the issue with your furnace and make the necessary repairs immediately.

Furnace Blowing Cold Air in Parowan, UT? Contact Us and Get It Fixed Fast

Iron Mountain Plumbing specializes in helping homeowners in Parowan, UT install, maintain, and repair heating and cooling systems. If you have a furnace blowing cold air, please don’t hesitate to contact us.

We also offer our customers a comprehensive range of plumbing and water treatment services throughout Southern Utah. Call us today to schedule an appointment.

Sump pumps are critical pieces of plumbing equipment meant to keep basements and crawl spaces dry from groundwater. When you experience heavy rains, the unit may seem to operate non-stop. Exactly how long can a sump pump run continuously?

In this guide, our Iron Mountain Plumbing experts share the basics of sump pump operation. Learn whether continuous use is normal or if it indicates a need for sump pump repair in St. George, UT. 

What Are Sump Pumps and How Do They Work?

Before we dive into sump pump troubleshooting information, it’s important to understand how this plumbing technology works. Homeowners across St. George rely on these systems, and those who frequently deal with flooded basements can benefit the most. 

Below is a breakdown of how sump pumps work:

• Plumbers create a deep basin to place the device, which operates via an electric motor. 
• Groundwater fills inside the basin until a float switch triggers the unit to turn on. 
• An impeller rotates to push water through a connected discharge line. 
• The discharge line runs through the yard to release water away from the foundation. 
• The machine automatically shuts off when the water inside the pit reaches a certain level.

Identifying Normal Sump Pump Usage Patterns in St. George

How long can a sump pump run continuously? Modern systems can push water through discharge lines for up to 22 consecutive hours. Your equipment might run for several hours when conditions call for it and show no signs of sump pump overheating or failure. 

Ongoing operation isn’t uncommon if the area experiences severe storms that bring multiple days of heavy rain. As basin water levels continue to rise, the system must work hard to expel all the moisture and keep your basement or crawl space dry. 

However, you don’t have to experience a lot of rain for the sump pump to kick on. These devices tend to operate more in the winter. The thawing ground contains a lot of moisture, while excess snowmelt can seep into sump pits. 

Three Common Malfunctions That Result in Continuous Sump Pump Operation

Ask an expert, “How long can a sump pump run continuously?” and they’ll tell you that several hours of usage isn’t always a concern. Bear in mind that a sump pump failure causes abnormal operation and may leave your system running longer than necessary. Check out some common issues that make these devices operate constantly and how to address them. 

1. Sump Pump Float Switch Issues

The float switch not only signals when the system must begin extracting water but also when it should shut off. If your unit has a faulty float switch, it may not stop running despite low levels inside the basin. Have a professional plumber inspect the equipment and perform repairs if necessary. 

2. A High Water Table

Heavy rains can lead to a high water table and increase the risk of groundwater seeping into your foundation. Installers must be aware of the water table when they place the sump pump to avoid issues like continuous operation. If you notice this problem, you might need to relocate the basin or install a secondary pump for extra support. 

3. Electrical Problems

How long can a sump pump run continuously during dry weather? A functioning system shouldn’t operate at all during dry conditions. If yours does, you may have to address some electrical malfunctions. 

Faulty wiring or motor components can incorrectly lead your unit to keep running for hours, even when it’s not necessary. You should have an experienced St. George plumber inspect the equipment and recommend the best course of action, such as electrical repairs or system replacement. 

Conduct regular maintenance to help your sump pump operate properly. Clean any debris out of the pit to avoid clogged discharge lines, and test the pump by pouring a few gallons of water into the basin. If problems persist despite maintenance, you may need to replace the system.

Our St. George Plumbers Can Restore Your Faulty Pump

How long can a sump pump run continuously? If your system must contend with heavy rains, it may operate for longer than usual. However, you must recognize the signs of a failing sump pump, such as continuous operation during the dry season, and act quickly.

Reach out to Iron Mountain Plumbing if your unit appears to malfunction. We specialize in sump pump repairs and will do everything we can to keep your basement dry. Call today!

There’s nothing worse than going to brush your teeth or filling up a glass of refreshing water and finding brown liquid coming from the faucet. Rusty tap water affects countless homeowners, but you don’t have to let it take a toll on your normal routine.

In this guide, our emergency plumbers in Ivins, UT, share the common causes of rust-colored water, its dangers, and what you can do to enjoy clear H2O again. 

Why Is Rust-Colored Liquid Coming From the Tap in Your Ivins Home? 

It can be quite jarring when you turn the handle on your faucet and find reddish-brown liquid filling the sink. Why do you suddenly see this instead of the clear, clean water that usually comes from the tap?

Several issues may be to blame, including:

• Mineral deposits: Municipal piping systems may send a water supply dense with minerals into your home. Ivins locals may notice changes in their supply due to the amount of minerals in the liquid. 
• Impacted supply lines: Rust can stem from the pipe itself and end up affecting the substances inside it. If one supply line begins to deteriorate, you might notice rusty tap water streaming from only that connected faucet rather than affecting all your home’s plumbing fixtures. 
• Sediment buildup: Can you enjoy a cold, refreshing glass of H2O but find that your shower head only distributes odd-smelling, discolored water? Your hot water heater tank likely has sediment inside, impacting the supply that runs through your pipes. 

Whether you believe iron contamination or a neglected water heater to be the source of the problem, it’s best to connect with a plumber. Experts can evaluate the situation, test all faucets, and recommend proven solutions. 

Unwanted Consequences of Water Discoloration and Contamination

Having rusty tap water in your Ivins home not only affects your plumbing fixtures but impacts your health and hygiene as well. Take immediate action if this issue affects your home to avoid the following:

• Iron poisoning: An unpleasant metallic taste in water could stem from excess iron inside the supply. Consuming too much can lead to iron poisoning, which causes symptoms like nausea, vomiting, and liver damage.
• Skin rashes: Bathing in unsanitary water can wreak havoc on your skin. Mineral imbalances often cause itchy, flaky skin, with some people prone to rashes. 
• Brittle, dull hair: Lathering your hair with shampoo might not be enough to get it clean and healthy if you rinse it with contaminated water. 
• Damaged clothing: Imagine taking a load of laundry out of the machine only to find that your clothes are somehow dirtier after a wash. When the taps supply oxidized liquid to the washer, it results in a stained, unsightly wardrobe. 

How To Eliminate Rust From Your Water Supply: Three Tips for Ivins Homeowners

Modern plumbing systems have come a long way, but it’s not uncommon for your pipes to carry rusty water. What can you do to fix this? Experts recommend the following tips. 

1. Let the Faucets Run

The discoloration may be due to some excess debris inside the pipes that needs to run its course. You can let the faucet run for a few minutes in hopes that the rusty tap water will soon turn clear. Bear in mind that this may only be a short-term solution and won’t help if you have corroded pipes or a highly contaminated supply line. 

2. Install a Filtration System

A water quality testing expert can identify all levels of minerals, chemicals, and metals within your home’s supply. Abnormal or dangerous levels of contaminants often call for a whole-house filtration system. This technology keeps households safe by eliminating all sediment and unwanted debris that flows through municipal pipelines. 

3. Replace Your Pipes

If the contamination stems from pipe corrosion, your best solution is to replace all corroded plumbing. The problem will continue to worsen if you don’t act quickly. Ignoring the issue increases the risk of leaks and serious damage, so don’t hesitate to schedule a pipe replacement service. 

Your plumbing system will operate without issue when you restore faulty pipes. 

Address Water and Piping Issues With the Help of Our Ivins Plumbers 

Don’t let rusty tap water threaten your hygiene and safety. At Iron Mountain Plumbing, we know how to pinpoint the causes of water discoloration and provide solutions to give you peace of mind. Reach out to us if you’re dealing with this issue and want experts to provide home plumbing safety tips.